Category: Evergreen

Western Timber Frame Builds Timber Structures With Cabinetry Precision, Patented Engineering, And Integrated Power

Based in Payson, Utah, the company has delivered 6,000+ custom pergolas, pavilions, and cabanas nationwide using a patented joint system tested to 11,000 lbs.

PAYSON, UT, UNITED STATES, March 18, 2026 /EINPresswire.com/ — Co-founder Hyrum Thompson learned his standard in cabinetry at age 14: if you have to hide it, it’s not done. Decades later, that same intolerance for shortcuts is the founding principle at Western Timber Frame — and the reason the company’s structures have survived hurricanes, earned 28 Best of State awards, and landed three consecutive spots on the Inc. 5000 fastest-growing companies list.

At the center of every Western Timber Frame structure is The Dovetail Difference^® — a patented trapezoidal mortise and tenon joint that eliminates exposed bolts, screws, and metal hangers entirely. Thompson developed it after identifying a flaw in traditional joinery: conventional center-cut mortises weaken the post at its core. His exterior beveled design distributes load across a broader surface area without compromising the timber itself. Independent engineering tests have verified the joint holds over 11,000 lbs. of force — 500% greater than conventional fastener-based connections. The geometry tightens under load, flexes with the natural seasonal movement of timber, and requires no maintenance, re-tightening, or hardware replacement over time.

That standard carries through every component. Structures are built with full-dimension, rough-sawn timbers — not the undersized dimensional lumber found in kit pergolas. The 8,000 Series, the company’s most popular line, uses 8×8 posts, 4×12 beams, 3×10 rafters, and 2×6 shade planks. A 14′×22′ structure in this series contains 1,382 board feet of timber and weighs 4,561 lbs. Before shipping, every structure receives two backrolled coats of Sherwin-Williams UV-rated exterior stain — applied in-shop, including the interior faces of joints that become unreachable after assembly. The customer receives a finished structure, not a project.

In 2017, Hurricane Irma swept through Florida and cleared most outdoor structures in its path. A Western Timber Frame pergola held firm. Homeowner Kenneth Baker wrote afterward: “She stood tall and proud and never wavered. Be proud of your product.” Standard structures are wind-rated to 120 mph, enabled in part by the company’s proprietary EarthAnchor™ Structural Knife Plates — custom-engineered aluminum hardware that anchors each post to its footing, acts as a moisture barrier between timber and concrete, and installs completely concealed within the post. These plates are not available at retail; they are engineered specifically for each project.

Design at Western Timber Frame begins with how people actually use a space. Co-founder and president Laurence Bunker built the company’s design philosophy around one statistic from the Journal of Leisure Research: family leisure satisfaction is the single strongest predictor of overall family life satisfaction. Every layout is developed around guest flow, zone definition — dining, lounge, and service — and proportions that hold up when real people arrive. The company applies the golden ratio (1:1.618) to structural dimensions and quantifies shade through its proprietary ShadePrint™ metric: Western Timber Frame standard kits average 80%+ ShadePrint™, comparable to standing under a large shade tree. Most competing kits produce below 40–50%.

The company’s most popular upgrade, TimberVolt^® Power, solves the problem of outdoor electrical infrastructure by eliminating it entirely as an afterthought. Each TimberVolt post is center-drilled to create an internal wiring pathway; electrical boxes are routed within the timber to accept standard 120V components. Posts arrive pre-wired and ready for panel connection — supporting lighting, ceiling fans, heaters, and outlets for televisions and speakers, with no visible conduit. Combined with a patent-pending moisture cap system that seals the post-to-beam joint, Western Timber Frame structures address every failure point conventional outdoor construction leaves exposed.

KEY FACTS

•Patented systems: The Dovetail Difference^® joinery, Beam-to-Post™ connection, EarthAnchor™ Knife Plate, patent-pending moisture cap, TimberVolt^® Power.
•Joint strength: 11,000+ lbs. independently tested — 500% greater than conventional fastener connections.
•Wind rating: 120 mph standard; engineerable to 120+ mph.
•ShadePrint™: 80%+ standard — most competing kits average below 40–50%.
•Awards: 28 Best of State; Best of Houzz four consecutive years; Inc. 5000 three consecutive years.
•Scale: 6,000+ structures delivered to all 50 states.
•Sustainability: U.S. softwood forests maintain net growth; ~3 trees planted for every 1 harvested.

ABOUT WESTERN TIMBER FRAME

Western Timber Frame is a family-owned designer and builder of custom timber structures based in Payson, Utah, serving residential and commercial clients across all 50 states. Founded by Hyrum Thompson and Laurence Bunker, the company is known for The Dovetail Difference^® — a patented joinery system tested to 500% greater structural strength than conventional fastener connections. To schedule a free design consultation, visit westerntimberframe.com or call (877) 870-8755.

Laurence Bunker
Western Timber Frame
+1 877-870-8755
hyrumt@westerntimberframe.com

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Influential Women Showcases Stephanie Littlejohn: Assistant Controller And Accounting Professional With 25+ Years

WICHITA, KS, UNITED STATES, March 18, 2026 /EINPresswire.com/ — Seasoned Financial Leader Providing Expertise in Accounting Operations, Accuracy, and Team Leadership

Wichita, Kansas – Stephanie Littlejohn is an accomplished accounting professional with over 25 years of experience spanning all facets of accounting and financial operations. She currently serves as Assistant Controller at KMS, LLC, where she oversees vital functions including bi-weekly payroll, monthly and quarterly commissions, payroll tax, workers’ compensation cases, and comprehensive month-end close activities. Her expertise in trial balance reviews, depreciation, goodwill, prepaid expenses, and construction-in-progress ensures accurate financial reporting and operational integrity across the organization.

Stephanie holds a Bachelor’s Degree in Accounting from Southwestern College and an Associate’s Degree in Accounting from Cowley County Community College. Her career demonstrates consistent excellence in managing complex accounting environments across a range of industries, including manufacturing, aerospace, hospitality, and multi-unit restaurant operations. She has developed hands-on leadership experience in accounts payable and receivable, inventory reconciliation, bank reconciliations, and system process improvements, allowing her to streamline operations and enhance financial accuracy.

Known for her problem-solving mindset, Stephanie embraces the challenges of accounting as opportunities to learn, innovate, and improve efficiency. She is widely recognized for her meticulous attention to detail, collaborative approach, and commitment to continuous professional growth. Stephanie brings both depth of experience and a steady leadership presence to every team she supports.

Stephanie attributes her success to hard work, perseverance, and a clear commitment to her goals. Over nearly three decades, she diligently worked toward her role as Assistant Controller, a position she has held proudly for over a year. She credits her success to the guidance of her CFO, whose open-door approach fosters professional development, as well as the support of her cohesive team, whose collaboration strengthens the organization’s overall performance.

Reflecting on her career journey, Stephanie emphasizes the importance of education and perseverance. While completing her degree, she faced significant personal challenges, including the loss of her father, a serious car accident, and her sister’s illness. Honoring a promise to her father, she completed her degree, an achievement that continues to inspire her resilience and dedication in her professional life.

For young women entering the accounting field, Stephanie encourages curiosity, versatility, and persistence. She advises exploring all available opportunities, committing to lifelong learning, and cultivating self-belief. She stresses that perseverance and dedication will help open doors and sustain long-term career success, even in the face of challenges.

Stephanie identifies emerging challenges in her field, such as leveraging AI tools like Copilot to optimize daily accounting tasks and balancing the increasing demands of her role with family priorities. She sees these challenges as opportunities to develop a career that blends professional excellence with meaningful personal connections, including cherished time with her granddaughter.

At the core of Stephanie’s professional and personal life are the values of devotion, integrity, dedication, and consistency. She remains committed to her family and friends while delivering her best work with ethical responsibility and focus. Stephanie Littlejohn’s career exemplifies a harmonious balance of personal fulfillment and professional achievement, built on resilience, perseverance, and a steadfast commitment to excellence.

Learn More about Stephanie Littlejohn:

Through her Influential Women profile, https://influentialwomen.com/connect/Stephanie-Littlejohn

Influential Women

Influential Women provides a platform where women from all backgrounds can connect, share their perspectives, and create content that empowers themselves and others. Through storytelling, thought leadership, and creative expression, Influential Women amplifies voices that inspire change.

Editorial Team
Influential Women
email us here

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Influential Women Features Rebecca Blacketer York: Product Manager at LinenMaster by TEXO

EXETER, NH, UNITED STATES, March 18, 2026 /EINPresswire.com/ — Delivering Innovative Software Solutions and Customer-Focused Excellence in Industrial Laundry Operations

Rebecca Blacketer York is a seasoned product and customer solutions professional currently serving as a Product Manager at Linenmaster by TEXO, where she provides innovative software solutions to support industrial laundries. With more than 17 years at LinenMaster, Rebecca has built deep institutional knowledge and earned a reputation for delivering reliable, customer-focused results. Her collaborative approach and dedication to client and team success have made her a valued leader in a fast-paced, evolving industry.

Rebecca holds a Bachelor of Science in Computer Information Systems from Southern Oregon University and brings a solutions-oriented mindset to every project. Her career journey at LinenMaster began as a Help Desk Analyst, later advancing to Help Desk Manager. In that role, she oversaw support operations, mentored team members, and implemented process improvements that enhanced both efficiency and customer satisfaction. Today, her expertise spans project management, SQL, system support, and customer service, allowing her to bridge the gap between technical functionality and real-world client needs.

Rebecca attributes her success to her strong desire to provide for her family while continuing to grow personally and professionally. She is driven by the satisfaction of making meaningful progress each day and achieving goals alongside her family. Balancing the responsibilities of a working mother has been challenging, she notes, but also deeply rewarding, as it has allowed her to invest in her career while nurturing her family.

For young women entering her industry, Rebecca offers this advice: “Stay true to who you are, lead with confidence, and don’t compromise your authenticity to fit someone else’s expectations. Your individuality and voice are strengths—protect them and let them guide your career.”

Family, connection, and giving back are the most important values to Rebecca. She cherishes time with her loved ones, enjoys traveling, expresses creativity through crafts, and remains actively engaged in volunteering within her local community. She looks forward to supporting and celebrating life’s journeys, particularly as she explores the world alongside her son, who serves in the United States Air Force.

Based in New Hampshire, Rebecca Blacketer York continues to play a key role in supporting LinenMaster’s growing client base, driving product excellence, enhancing customer satisfaction, and contributing to the company’s long-term success.

Learn More about Rebecca Blacketer York:

Through her Influential Women profile, https://influentialwomen.com/connect/Rebecca-york

Influential Women

Influential Women provides a platform where women from all backgrounds can connect, share their perspectives, and create content that empowers themselves and others. Through storytelling, thought leadership, and creative expression, Influential Women amplifies voices that inspire change.

Editorial Team
Influential Women
email us here

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Precise and Clean Joints, Soldering Under High Vacuum Makes This Possible

Conventional soldering methods quickly reach their limits when joining carbides, diamonds or ceramics.

For us, Pfeiffer embodies maximum reliability, which is why we use its vacuum pumps in our vacuum soldering systems – because we want to ensure the best possible quality for our customers.”
— Simon Riefling, International Sales at iew GmbH

ASSLAR, GERMANY, March 18, 2026 /EINPresswire.com/ — Clean, oxide-free solder joints and consistent results can only be achieved under high vacuum conditions. This is precisely where iew’s vacuum soldering process comes into play: The systems work using precisely coordinated vacuum technology from Pfeiffer Vacuum+Fab Solutions and enable stable processes with minimal energy consumption and low maintenance effort.

To develop a new generation of vacuum soldering systems, iew needed a reliable high vacuum solution that was both technically robust and economical. Together with Pfeiffer Vacuum+Fab Solutions, a system concept consisting of a combination of turbomolecular vacuum pump and backing pump was developed. The system ensures a final vacuum of up to 8×10⁻⁶ hPa (mbar). This results in reproducible solder joints even on temperature-sensitive materials. Under these almost gas-free conditions, oxidation is prevented, heat transfer is precisely controlled and the components are joined to the solder alloy evenly. At the same time, the dry vacuum pumps reduce maintenance effort and prevent contamination in the process area – a crucial factor for ensuring the high quality of the manufactured components.

Where precision meets innovation
The company was founded as the engineering firm Schweikhart in 1996 by Dipl.-Ing. Martin Schweikhart and was the result of a thesis on the topic of induction heating. Just one year later, the company was renamed iew induktive Erwärmungsanlagen GmbH. With around 20 employees, iew now supplies customers worldwide.

In addition to individually configurable induction heating systems, iew’s vacuum soldering systems make up a steadily growing proportion of its revenue. The company is the only provider worldwide to supply both technologies from a single source – a benefit for many customers who require both procedures for their manufacturing process.

The systems are used for applications such as soldering high-performance diamond tools, shrink fitting, annealing and hardening of metals, as well as in testing technology and research. In the field of vacuum soldering, around 80 percent of the applications are in tool technology. Manufacturers of probes and medical technology companies are also showing great interest in soldering technology.

Vacuum soldering under optimal conditions
The vacuum soldering process starts with preparing the components to be joined, which may be made of carbide, polycrystalline diamond or ceramic, depending on the application. After applying the soldering paste, the workpieces are positioned in a vacuum chamber made of quartz glass. The chamber is then evacuated until a pressure of approximately 5×10⁻⁴ hPa (mbar) is reached. This removes oxygen, nitrogen and humidity from the process area – essential to prevent oxidation and contamination at the soldering joints.

During the soldering process, infrared heaters heat the components precisely. First, they are homogeneously preheated so that no stresses occur in the material. As soon as the soldering temperature is reached, the vacuum pumps reduce the pressure further to around 5×10⁻⁵ hPa (mbar). This high vacuum level minimizes heat conduction through residual gasses and ensures even melting of the solder alloy, which typically takes place around 700–900 °C.

After the soldering process has been completed, the vacuum level is further increased to approximately 8 to 9×10⁻⁶ hPa (mbar). In this virtually gas-free environment, the workpieces can cool down in a controlled manner without oxygen or nitrogen reacting with the surface. Only once the temperature has dropped to approximately 150 °C is ambient air slowly let in again. This ensures gentle pressure equalization.

The combination of precise temperature control and stable high vacuum conditions ensures reproducible results, tight and clean solder joints and consistently high product quality. The robust systems are designed for continuous industrial operation and impress with their long service life and minimal maintenance requirements.

Custom vacuum technology instead of off-the-shelf solutions
In 2016, iew began developing the first prototypes for vacuum soldering systems, which would later become available in two different versions – a compact variant for smaller batch sizes and a larger system for industrial series operation. The aim was to create a reliable and resource-saving alternative to conventional systems, which often worked with oil diffusion vacuum pumps. During start-up, the oil had to be brought up to operating temperature, and there was always a risk of oil vapors entering the vacuum chamber and contaminating sensitive surfaces during the process. In addition, maintenance and cleaning were accordingly time-consuming.

In response to these problems, Pfeiffer Vacuum+Fab Solutions helped create a compact high vacuum solution that eliminates the need for diffusion vacuum pumps and is significantly more efficient. The jointly realized system architecture combines turbomolecular vacuum pumps with dry or oil-lubricated backing pumps – depending on the process requirement. This combination ensures stable pressure conditions down to the range of 8×10⁻⁶ hPa (mbar), enabling clean, reproducible soldering with low energy and maintenance effort.

A HiPace turbopump and an oil-free scroll vacuum pump from the HiScroll series are used in the smaller system variant, supplemented by precise vacuum gauges, dust separators and robust valves. For higher throughputs, the larger system uses a HiPace turbopump in combination with an oil-lubricated DuoVane rotary vane vacuum pump. All components are perfectly coordinated with each other and have been designed for operation under continuously changing thermal loads with occasional accumulation of dirt – a prerequisite for high process stability in daily use.

Simon Riefling, responsible for international sales at iew, says: “In 2018, we chose the vacuum solutions from Pfeiffer Vacuum+Fab Solutions because the company stands for top quality and excellent service. As a German manufacturer with remarkable high-tech competence, Pfeiffer is the market leader with products we see time and again at universities, colleges and in renowned companies. For us, Pfeiffer embodies maximum reliability, which is why we use its vacuum pumps in our vacuum soldering systems – because we want to ensure the best possible quality for our customers.” The installed vacuum solutions are characterized by easy maintenance and a long service life.
For example, the turbopumps are designed for a maintenance-free running time of up to five years.

Dr Sandra Thirtle-Höck
Pfeiffer Vacuum+Fab Solutions
+49 64 418021460
email us here
Visit us on social media:
LinkedIn
YouTube

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
One Hour Heating & Air Conditioning Wins 2026 Consumer Choice Award for Air Conditioning and Heating Contractor in Charlotte
CHARLOTTE, NC / ACCESS Newswire / March 18, 2026 / One Hour Heating & Air Conditioning, a locally owned HVAC service provider serving the greater Charlotte area, has been awarded the 2026 Consumer Choice Award in the Air Conditioning and Heating Contractor category. Recognized for its punctual, professional service and dedication to customer comfort, One Hour Heating & Air Conditioning continues to deliver high-quality heating and cooling solutions trusted by homeowners across the region.

One Hour Heating & Air Conditioning offers comprehensive HVAC services, including air-conditioning repair, replacement and maintenance; heating and furnace services; ductwork cleaning; and indoor air-quality system installation. The company emphasizes that its technicians are licensed, bonded and insured, and that every service call reflects professionalism, integrity and respect for customers’ homes.

“Our mission is to make every experience stress-free and dependable,” says the company. “We arrive when we promise, fully prepared to do the job right the first time.”

Service Excellence Built on Trust

Within the Charlotte area, One Hour Heating & Air Conditioning stands out for its transparent pricing, on-time arrival guarantees and customer-first approach. The company’s service commitments include:
- 24/7 emergency availability for HVAC issues.
- Straightforward pricing with no hidden surprises.
- A satisfaction guarantee backed by accountability and transparency.
These principles have helped build a strong reputation among local homeowners and businesses. The company maintains an impressive 4.8-star average rating from thousands of customer reviews and is consistently recognized for reliability and professionalism.

“Our customers know they can count on us,” says the team. “We take pride in earning trust through quality work and honest service.”

Serving the Greater Charlotte Region

Based at 3030 Whitehall Park Drive, Suite 1, in Charlotte, One Hour Heating & Air Conditioning proudly serves neighbouring communities including Matthews, Huntersville and Waxhaw. The company provides responsive, full-service heating and cooling solutions for both residential and light commercial clients.

As part of the One Hour Heating & Air Conditioning network, the Charlotte location benefits from nationally recognized service standards while maintaining its local ownership and community-driven focus. This combination allows the company to deliver trusted expertise backed by the personal service of a hometown team.

Recognition Backed by Research

The Consumer Choice Award is the only organization in North America that recognizes business excellence through independent market research. Winners are determined by evaluating consumer perceptions, satisfaction and reputation – not by public voting or judging panels.

For One Hour Heating & Air Conditioning, this recognition affirms its reputation for honesty, consistency and professional care within the Charlotte community.

“We are honoured to receive this award,” says the team. “It represents the trust our customers place in us every day and motivates us to continue raising the bar in comfort, reliability and service.”

A Continued Commitment to Excellence

As HVAC technology evolves and homeowners demand greater energy efficiency, One Hour Heating & Air Conditioning continues to invest in technician training, modern equipment and communication tools that enhance customer experience. The company’s goal is to make every interaction smooth, transparent and dependable from start to finish.

With decades of industry experience and a strong record of customer satisfaction, One Hour Heating & Air Conditioning remains committed to providing exceptional service and dependable comfort to the people of Charlotte.

To learn more about One Hour Heating & Air Conditioning or to schedule service, visit www.dependaworthyonehour.com.

About One Hour Heating & Air Conditioning
One Hour Heating & Air Conditioning is a full-service HVAC company based in Charlotte, North Carolina. Offering air-conditioning and heating repair, replacement, maintenance, ductwork and indoor air-quality systems, the company’s licensed, bonded and insured technicians deliver reliable, around-the-clock service. With transparent pricing and a commitment to dependable results, the team ensures comfort that customers can count on.

About Consumer Choice Award
Since 1987, Consumer Choice Award has been recognizing business excellence across North America. Through rigorous, independent consumer research, only businesses with outstanding reputations for quality and customer satisfaction earn this distinction. Learn more at www.ccaward.com.

Contact Information
Sumi Saleh
Communications Manager
ssaleh@ccaward.com

SOURCE: Consumer Choice Award

View the original press release on ACCESS Newswire
March 18, 2026
Pro Scaffold Inc Recognized with Consumer Choice Award for Scaffolding in London and Greater Region

LONDON, ON / ACCESS Newswire / March 18, 2026 / Pro Scaffold Inc has been named the 2026 Consumer Choice Award winner in the category of Scaffolding for the London and Greater Region. The recognition highlights the company’s strong reputation as a trusted scaffolding and equipment distributor serving contractors, builders, and project managers across the region.

The Consumer Choice Award is determined through independent market research and recognizes businesses that are top-ranked by consumers in their category. For Pro Scaffold Inc, the 2026 designation reflects its consistent commitment to product quality, dependable service, and industry expertise.

Pro Scaffold Inc offers a comprehensive range of scaffolding systems designed to meet the demands of projects of all sizes. Its inventory includes frame scaffolding systems and pump jack systems, providing versatile solutions for residential, commercial, and industrial applications. In addition, the company stocks a wide selection of ladders and related accessories, ensuring customers have access to essential equipment in one convenient location.

What distinguishes Pro Scaffold Inc within the industry is its dual focus on accessibility and flexibility. Customers have the option to purchase equipment outright or rent it for specific projects, allowing contractors to manage costs while maintaining access to reliable, high-quality systems. This adaptable approach supports both short-term project needs and long-term business growth.

The team at Pro Scaffold Inc works closely with clients to understand project requirements, timelines, and safety considerations. By offering knowledgeable guidance and dependable inventory availability, the company helps ensure projects proceed efficiently and safely. This service-driven mindset has earned Pro Scaffold Inc a loyal client base throughout the London and Greater Region.

“Our goal has always been to provide reliable scaffolding solutions backed by strong customer service,” said the team at Pro Scaffold Inc. “Being recognized with the 2026 Consumer Choice Award is a proud moment for our team. It reinforces the trust our customers place in us and motivates us to continue delivering dependable products and support.”

Safety and reliability remain at the core of the company’s operations. By maintaining a large and well-stocked inventory, Pro Scaffold Inc ensures that contractors can access the equipment they need without unnecessary delays. Its focus on quality systems and accessories supports safe working conditions across a wide range of construction environments.

The 2026 Consumer Choice Award solidifies Pro Scaffold Inc’s position as a leading provider of Scaffolding in the London and Greater Region. With a broad product offering, flexible purchasing and rental options, and a strong commitment to customer service, the company continues to play a vital role in supporting the local construction industry.

About Pro Scaffold Inc
Pro Scaffold Inc is a leading scaffolding and equipment distributor serving the London and Greater Region. The company provides a wide variety of scaffolding systems, including frame scaffolding and pump jack systems, along with ladders and related accessories. Offering both equipment sales and rental options, Pro Scaffold Inc supports residential, commercial, and industrial projects with dependable products and knowledgeable service. For more information, visit www.proscaffold.ca.

About Consumer Choice Award
Consumer Choice Award has been recognizing and promoting business excellence in North America since 1987. Its rigorous selection process ensures that only the most outstanding service providers in each category earn this prestigious recognition. Visit www.ccaward.com to learn more.

Contact Information
Sumi Saleh
Communications Manager
ssaleh@ccaward.com

SOURCE: Consumer Choice Award

View the original press release on ACCESS Newswire

March 18, 2026
BETMAT Releases Comprehensive Industry Guide on Endotoxin Compliance for Injectable Pharmaceuticals

DOVER, DE, UNITED STATES, March 18, 2026 /EINPresswire.com/ — The production of parenteral drugs demands an exacting approach to microbiological purity to prevent pyrogenic responses in patients. To address these critical safety requirements, BETMAT Biotechnology LLC has released a specialized operational guide focused on Reliable Endotoxin Testing For Injectable Pharmaceuticals, a systematic framework designed to optimize contamination control through high-sensitivity detection technologies. This guide details the application of both traditional Limulus Amebocyte Lysate (LAL) cascades and modern biosynthetic alternatives to identify Gram-negative bacterial lipopolysaccharides. By providing standardized, interference-resistant protocols, this methodology enables Quality Control (QC) laboratories to maintain compliance with USP and European Pharmacopoeia (Ph. Eur.) standards, ensuring that batches of injectable medicine adhere to the safety mandates established by global health authorities.

I. Global Trends in Pyrogen Control and Manufacturing Standards
The Evolution Toward Kinetic and Molecular Quantification
The landscape of pyrogen detection has transitioned from qualitative observations to high-resolution molecular quantification. Historically, the industry relied on the Rabbit Pyrogen Test (RPT); however, the widespread adoption of the Bacterial Endotoxin Test (BET) has introduced a level of precision that was previously unattainable. As biopharmaceutical portfolios expand to include advanced therapy medicinal products (ATMPs) and recombinant proteins, the demand for rapid and efficient data has intensified. This has catalyzed a shift toward kinetic chromogenic and turbidimetric assays. These methodologies allow for the continuous monitoring of the enzyme-substrate reaction, providing the quantitative data necessary for risk assessments and the characterization of complex drug matrices.

Pharmacopeial Harmonization and Market Access
A key driver in the current regulatory environment is the ongoing harmonization of technical standards among the USP, Ph. Eur., and ChP. These efforts aim to reduce regional discrepancies in testing requirements and facilitate a more efficient global pharmaceutical supply chain. For manufacturers, this trend necessitates the use of multi-pharmacopeial compliant reagents capable of meeting stringent validation requirements, particularly during the Test for Interfering Factors. As drug delivery systems continue to evolve—incorporating advanced platforms such as liposomes and nanoparticle-based carriers—demonstrating that the product neither inhibits nor enhances the LAL reaction has become a critical component of regulatory submissions.

The Strategic Adoption of Recombinant Technologies
Sustainability is a core component of modern Quality Control strategy. The reliance on natural horseshoe crab populations for LAL production has led the industry to explore “3Rs” (Replacement, Reduction, and Refinement) compliant alternatives. The emergence of the Recombinant Factor C (rFC) Assay and Recombinant Cascade Reagent (rCR) represents a technological advancement. These biosynthetic tools offer a chemically defined, animal-free pathway for endotoxin detection. By providing a reagent with batch-to-batch consistency and high specificity, recombinant methods eliminate the risk of false positives from (1,3)-β-D-glucans.

In May 2025, recombinant endotoxin detection methods were officially implemented in the United States Pharmacopeia (USP). Among these technologies, the recombinant Factor C fluorescence assay for endotoxin detection was formally introduced in the European Pharmacopoeia (Ph. Eur.) in January 2021. The Chinese Pharmacopoeia (ChP), 2020 Edition, also lists recombinant technologies (rFC and rCR) as alternative methods to LAL reagents. Other national pharmacopoeias are actively advancing the regulatory recognition of recombinant endotoxin detection technologies.

Process Analytical Technology (PAT) in Bioprocessing
In modern bioprocess environments, endotoxin testing is being integrated earlier into the manufacturing cycle. The industry is moving toward a Quality by Design (QbD) model where in-process monitoring of raw materials and pharmaceutical water systems prevents downstream contamination. Utilizing efficient microbiological methods allows for real-time intervention, which is critical for maintaining the integrity of fermentation and purification steps. This proactive approach ensures that by the time a product reaches the final fill-finish stage, the bacterial endotoxin burden has been monitored and controlled throughout the manufacturing process, reducing the risk of batch rejections.

II. Core Competencies and Analytical Solutions
Technical Specialization in Endotoxin Analytics
BETMAT Biotechnology LLC is a professional entity dedicated to the development and global distribution of bacterial endotoxin and pyrogen detection reagents. The organization focuses on the technical nuances of the LAL cascade and its recombinant counterparts, providing the pharmaceutical and life sciences community with reagents characterized by high sensitivity and long-term stability. The core focus lies in providing validation support, ensuring that QC departments can implement testing protocols that remain robust under the requirements of high-throughput manufacturing.

A Comprehensive Portfolio for Pharmaceutical Validation
The organization provides an ecosystem of tools designed to address specific analytical challenges in Quality Control and Monitoring:

Validated LAL Systems: Including Gel-Clot, Chromogenic, and Turbidimetric assays tailored for traditional Bacterial Endotoxin Test workflows and routine safety screening.

Biosynthetic Detection Assays: Providing animal-free rFC and rCR solutions for organizations prioritizing sustainable operations and ecological responsibility.

Monocyte Activation Test (MAT) Kits: Engineered for the detection of pyrogenic contaminants in pharmaceuticals and biological products. These kits employ human monocyte-based immune responses to identify both endotoxin and non-endotoxin pyrogens. By measuring the release of pro-inflammatory cytokines (such as IL-1β, IL-6, or TNF-α), MAT provides a physiologically relevant in vitro alternative to traditional pyrogen tests, suitable for complex formulations.

Depyrogenated Accessories: A range of endotoxin-free glass tubes, LAL Reagent Water (LRW), and Control Standard Endotoxin (CSE) to ensure the integrity of the validation process.

Industrial and Clinical Application Frameworks
The practical utility of these detection technologies is evidenced in various high-stakes scenarios. In bioprocess departments, reagents are used to monitor the quality of Water for Injection (WFI) and to validate the effectiveness of cleaning-in-place (CIP) cycles. Clinical applications are equally vital; reagents play a role in testing dialysis fluids to protect patients from endotoxin-induced fever. Furthermore, medical device manufacturers utilize these kits to ensure that surgical implants meet regulatory requirements and global sterility standards.

Global Technical Support and Compliance Guidance
Beyond reagent supply, the organization serves as a technical consultant for Quality Assurance (QA) teams navigating the complexities of method transfer. Transitioning to kinetic or recombinant assays requires detailed validation data and expertise in the Test for Interfering Factors. Specialized guidance is provided to ensure that these transitions are compliant with multi-pharmacopeia standards. This collaborative approach is utilized by biotech firms seeking global market authorization, where the robustness of the Bacterial Endotoxin Test is a component supporting CMC (Chemistry, Manufacturing, and Controls), clinical safety, manufacturing process control, quality release, and regulatory submission.

III. Conclusion: Securing the Future of Parenteral Safety
As the pharmaceutical industry continues to innovate with the development of personalized vaccines and cell therapies, the protocols for ensuring safety must remain dynamic. BETMAT Biotechnology LLC focuses on the advancement of endotoxin detection science, providing the industry with the tools to meet global standards. By facilitating reliable endotoxin testing for injectable pharmaceuticals, the organization supports a manufacturing environment that is both technologically advanced and compliant with safety mandates. This focus on providing validated, interference-resistant, and sustainable solutions ensures that the global pharmaceutical supply chain remains resilient.

For more information regarding LAL reagents, recombinant technology for BET assays, and specialized validation tools, visit the official website: https://www.betmatbio.com/

BETMAT BIOTECHNOLOGY LLC
BETMAT BIOTECHNOLOGY LLC
+86 18101764785
sales@betmatbio.com

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Influential Women Spotlights MaryBeth Acosta, PharmD, BCNP: Business Unit Manager And Radiation Safety Officer

TEMPLE, TX, UNITED STATES, March 18, 2026 /EINPresswire.com/ — Advancing Patient Access, Safety, and Operational Excellence in Nuclear Pharmacy Across a National Radiopharmacy Network

MaryBeth Acosta, PharmD, BCNP, is a Board-Certified Nuclear Pharmacist and a trusted leader in radiopharmaceutical operations, committed to advancing patient access to high-quality nuclear medicine. As Business Unit Manager and Radiation Safety Officer for RLS Radiopharmacies, Dr. Acosta oversees regional business operations, ensures strict compliance with radiation safety standards, and drives clinical and operational excellence across one of the nation’s leading radiopharmacy networks.

Dr. Acosta earned her Doctor of Pharmacy from the University of Oklahoma Health Sciences Center and a Bachelor of Science in Chemistry from East Central University. She entered the field of nuclear pharmacy after building a broad foundation across multiple pharmacy practice environments. Her career includes serving as a Clinical Pharmacist in acute care settings at Hill Regional Hospital and Crescent Medical Center, where she managed medication verification, clinical monitoring, sterile compounding, and pharmacy technology oversight. Her extensive experience also spans retail, relief, and Pharmacist-in-Charge roles, where she supervised high-volume dispensing operations, immunization programs, and pharmacy technician training while maintaining strict adherence to USP and USP standards.

Early in her career, Dr. Acosta trained with the U.S. Department of Veterans Affairs, developing expertise in inpatient and outpatient operations, inventory management, crash cart support, and patient counseling for vulnerable populations. Since transitioning into nuclear pharmacy at RLS in 2021, she has expanded her technical and leadership portfolio, taking on business operations and regulatory responsibilities to ensure the safe production and delivery of radiopharmaceuticals.

A published contributor to the Journal of the American Pharmacists Association, Dr. Acosta has also collaborated with public health officials to develop emergency preparation materials related to pediatric medication safety. Her work reflects a commitment to patient-centered care, operational excellence, and education within the pharmacy community.

Dr. Acosta attributes her success to the support of her family and professional network, acknowledging that their guidance and encouragement have been invaluable throughout her career. She notes that the best advice she has received is that “experience is what you have after you need it,” emphasizing that challenges provide lessons that shape professional growth. For young women entering the pharmacy field, Dr. Acosta encourages authenticity and staying true to oneself, while recognizing that recruiting and retaining skilled talent remains a key industry challenge.

Family is at the heart of Dr. Acosta’s work and life, providing both motivation and grounding in her pursuit of excellence. As an advocate for nuclear medicine growth and supply chain resilience, she remains deeply committed to strengthening domestic radiopharmaceutical production and ensuring patients nationwide have access to lifesaving diagnostic and therapeutic care.

With her combined expertise in pharmacy operations, clinical practice, and leadership, Dr. MaryBeth Acosta continues to set a standard for excellence in nuclear pharmacy while supporting the next generation of professionals in the field.

Learn More about MaryBeth Acosta:

Through her Influential Women profile, https://influentialwomen.com/connect/marybeth-acosta

Influential Women

Influential Women provides a platform where women from all backgrounds can connect, share their perspectives, and create content that empowers themselves and others. Through storytelling, thought leadership, and creative expression, Influential Women amplifies voices that inspire change.

Editorial Team
Influential Women
email us here

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Influential Women Profiles Liz DeBetta: Award-Winning Scholar-Artist-Activist And Founder Of Migrating Toward Wholeness

PLYMOUTH, MI, UNITED STATES, March 18, 2026 /EINPresswire.com/ — Trauma-Informed Educator Empowers Adoptees, Survivors, and Marginalized Communities to Reclaim Their Voices Through Storytelling and Creative Expression

Plymouth, Michigan – Liz DeBetta is an award-winning scholar, artist, and activist, as well as the Founder of Migrating Toward Wholeness™, LLC, a healing-centered organization dedicated to empowering individuals through storytelling, embodiment, and narrative reclamation. With a Ph.D. in Interdisciplinary Studies from Union Institute & University, Dr. DeBetta has spent more than 20 years integrating creative writing, performance, and feminist critical theory to support adoptees, trauma survivors, and marginalized communities. Her innovative methodology, Migrating Toward Wholeness™, guides participants in transforming trauma into purpose, reclaiming their voice, and cultivating deeper self-awareness.

Migrating Toward Wholeness™ is a trauma-informed, story-centered process designed to support a wide range of individuals and groups, including:

Adoptees, foster youth, and families navigating identity, grief, and layered loss
Caregivers, educators, and helping professionals seeking trauma-informed tools and connection
Writers, creatives, and truth-tellers ready to reclaim their voice through story
Organizational leaders and teams building healing-centered, sustainable cultures
Anyone who has been told they are “too much” and is ready to take up space with wholeness and worth
The process is built on five foundational practices—Making Space to Heal, Rewriting the Truth, Expressing the Core/Primal Wound, Becoming the Subject, and Breaking Silences—each targeting one or more of the seven dimensions of trauma healing. From emotional and cognitive processing to nervous system regulation and relational repair, the methodology emphasizes integration and presence over rushed resolution, helping participants stay connected to their whole selves.

Dr. DeBetta’s commitment to healing through narrative stems from her own experience as an adoptee. While exploring her adoption story in a creative writing course, she discovered the transformative power of storytelling in confronting trauma and fostering emotional integration. This work became the foundation for her acclaimed solo performance, Un-M-Othered, which won Best Autobiographical Show at the United Solo Theatre Festival in 2022. The performance also informed her doctoral dissertation and served as the blueprint for Migrating Toward Wholeness™. Her book, Adult Adoptees and Writing to Heal, provides practical frameworks for narrative transformation and embodied healing.

Today, Dr. DeBetta is a sought-after speaker, facilitator, and advocate, leading workshops, retreats, and performances that create emotionally safe spaces for exploration, connection, and growth. She addresses critical topics including adoption, gender equity, and trauma recovery, helping participants reclaim their narratives and embrace their worth.

“I believe that our stories carry the keys to our wholeness; that more stories = more connection, and more connection = more healing. That is when we tell the truth — even the hard, hidden, messy parts — we create the possibility for connection, freedom, and healing. Through writing, storytelling, and presence, I hold space for people who’ve been silenced or erased to reclaim their voice, their worth, and their right to take up space,” says Dr. DeBetta.

Beyond her professional work, Dr. DeBetta enjoys cooking, gardening, and reading historical fiction.

Guided by the belief that healing through storytelling is a revolutionary act, Dr. Liz DeBetta continues to inspire others to reclaim, rewrite, and heal—one story at a time.

Learn More about Liz DeBetta:

Through her Influential Women profile, https://influentialwomen.com/connect/elizabeth-debetta or through her website, https://www.lizdebetta.com/

Influential Women

Influential Women provides a platform where women from all backgrounds can connect, share their perspectives, and create content that empowers themselves and others. Through storytelling, thought leadership, and creative expression, Influential Women amplifies voices that inspire change.

Editorial Team
Influential Women
email us here

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026
Understanding the Technical Passport: A Key Document for Machinery and Equipment

Whether you import machinery into Kazakhstan or export to other CIS countries like Uzbekistan, understanding the role of a technical passport is crucial.

NY, UNITED STATES, March 18, 2026 /EINPresswire.com/ — In today’s globalized industrial landscape, keeping track of machinery and equipment is not just a matter of efficiency—it’s a matter of compliance, safety, and legal accountability.
Enter the technical passport, a comprehensive document that consolidates the lifecycle, specifications, and operational history of machines and equipment, ensuring transparency and traceability from the factory floor to the end user.
Required across the Eurasian Economic Union (EAEU) and beyond, the technical passport is more than a bureaucratic formality. It records every detail—from commissioning and maintenance to repairs and disposal—while documenting modifications such as modernization, part replacements, and structural changes. For operators, regulators, and auditors, this single document serves as a cornerstone of operational safety, regulatory compliance, and quality assurance.

What is a technical passport?
A technical passport is a document that summarizes the key technical specifications and the entire product lifecycle (commissioning, maintenance, repairs, disposal) of a product. All changes made to the machine are entered in the passport: modernization, conversion, installation of spare parts, repair, and welding work.

The technical passport is an important document for the end user of the product, and it must be submitted to the accredited certification body as part of the certification process.

In which countries a technical passport is requiredt?
The technical passport is an important document in the Eurasian Economic Union: Kazakhstan, Belarus, Armenia, Kyrgyzstan, and Russia.

However, the certificate issued in accordance with GOST standards is also required in other CIS countries: Uzbekistan, Azerbaijan, Turkmenistan, and Tajikistan.

What information does a technical passport provide?
The technical passport contains the key technical data of a machine, installation, or device:
– Product information and technical specifications such as product name, manufacturer, date of manufacture, serial number, and intended use
– Components and their characteristics
– Service life, operating life, storage life, and manufacturer’s warranty
– Instructions for use and storage, including special safety measures and specific operating conditions
– Packaging, preservation, and recycling
– All modifications made to the machine: modernization, reconstruction, installation of spare parts, repairs, welding work
– Information on existing EAC approvals

Why is a technical passport required?
There are two main reasons why a technical passport is a mandatory document.
On the one hand, the technical passport for machines, installations, or pressure equipment is a prerequisite for EAC certification and EAC declaration. It is a key document, especially when equipment or machinery is used in high-risk industrial facilities. In such cases, technical passports are subject to state supervision.

Secondly, the technical passport is a key document that not only allows the operator to record the entire lifecycle of the machine, but also consolidates all relevant information on maintenance, inspections, repairs, and modifications in one place. It serves as proof of compliance with safety and quality requirements, facilitates the planning of preventive maintenance measures, and is an important tool for traceability and liability management. Through systematic documentation in the passport, the operator can minimize risks, improve the efficiency of the machine, and quickly demonstrate compliance with legal requirements in the event of audits or official inspections. Therefore, the technical passport must be carefully maintained and regularly updated throughout the entire service life of the product.

According to which standards is the technical passport prepared?
GOST 2.601-2019 “Unified system for design and operational documentation”
GOST 2.610-2019 “Unified system for design documentation”
These are the main standards. In addition, other GOST standards may also apply depending on the product and the requirements of the relevant technical regulations, for example:

GOST 34347-2017 “Steel welded vessels and apparatus. General technical requirements” – standards for pressure equipment
GOST 34612-2019 “Pipeline valves. Technical passport. Rules for development and preparation”
GOST 33259-2015 “Flanges for valves, fittings and pipelines for nominal pressure up to PN 250”

Content of a technical passport
The technical passport consists of a cover sheet and generally of the following sections:

– Basic information about the product and the technical data
– Completion
– Lifetime and storage duration, manufacturer’s warranty
– Preservation
– Notes on packaging
– Instructions for acceptance
– Notes on the loan of equipment during the use
– Instructions for repair
– Instructions for operation and storage (if necessary)
– Disposal information
– Other information

The technical passport must be stored carefully throughout the life of the product.

Key Facts About the Technical Passport
1. The technical passport is created separately for each installation or machine and for each individual serial number.
2. The technical passport is prepared in Russian. However, it is also possible to issue a bilingual passport. In most cases, the languages are Russian and English.
3. The technical passport is prepared by the machine manufacturer. An authorized representative can also create the passport. Specialized service providers also offer passport preparation, including in multiple languages.
4. The technical passport is a mandatory document required to obtain an EAC declarationor or an EAC certificate.
5. The technical passport is recognized in the following countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Russia, Tajikistan, Turkmenistan, Uzbekistan.

Alexej Schmidt
Schmidt&Schmidt OHG
+49 851 22608301
alexej.schmidt@schmidt-export.com

Legal Disclaimer:

EIN Presswire provides this news content “as is” without warranty of any kind. We do not accept any responsibility or liability
for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this
article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

March 18, 2026